Rear end troubles
So I opened up the rear end on my truck to change the diff fluid and the carrier is badly marked from the pinion grinding against it. It is an open 12 bolt with 3.07. So my question is what could be the cause of this. I am not very experienced in differential work.
|
Re: Rear end troubles
40 or so years of hard use causes a problem like that
|
Re: Rear end troubles
So the carrier having grooves ground into it from the pinion rubbing it is most likely just from worn out parts? Could it be an improper application of parts?
|
Re: Rear end troubles
It's because the pinion nut has come loose either presently or in the past. When you accelerate, the pinion is pushed towards the front of the truck, when you decelerate, it is pulled towards the case and if the nut is loose, the pinion eats into the case.
|
Re: Rear end troubles
Guess its time to get a new carrier. Ring and pinion look ok and the internals look good as well other than the pin that goes through the spider gears. Any suggestions on where I can buy a new one. Not looking to spend a ton and I'm ok with the open rear end
|
Re: Rear end troubles
Perfect time to add a posi and deeper gear!
|
Re: Rear end troubles
If the reason you opened it was to change the fluid, and not because it was acting up or making noise, then check the pinion to see if its loose or if anything else looks fishy. if you don't see any chunks of metal in the bottom of the case then maybe it had a problem in the past and was corrected. Fill her up and keep on truckin! (other than the pin that goes through the spider gears.) Whats wrong with the pin?
|
Re: Rear end troubles
If the backlash is OK, and the torque on the pinion nut is OK, and the ring-and-pinion look OK, I'd clean out the housing as best I could and put some new fluid in. Check it in a year to see how it's doing.
|
Re: Rear end troubles
Like the other guys said, if it checks out OK and the damage is from a previous failure, just refill and drive.
Posted via Mobile Device |
Re: Rear end troubles
I have a stock, open carrier I'd be happy to send you for the cost of shipping.it originally had 3:73 gears, but now its just a carrier- spider gears/cross shaft/shear pin. Let me know.
Ben Smith |
Re: Rear end troubles
Any idea what years are interchangeable with these trucks. I like having the 307 gears, I'm not looking to tow or race and like the idea of getting better mileage. I have a junk yard near me that list any carrier for $86 so I will most likely go get one there and if I'm lucky I'll find a posi. Thank you for the offer for the carrier but I don't think my gear set will work with it from what I understand. And as far as why I opened it up, I bought it from a friend and it had been sitting for a few years and figured it needed changed. The truck isn't on the road yet still putting it together.
|
Re: Rear end troubles
2 Attachment(s)
Pictures of the carrier
|
Re: Rear end troubles
Wow, I don't think a cleaning and refill is going to help! Your description of "badly marked" doesn't exactly describe that damage.
Paul |
Re: Rear end troubles
That is why I posted pictures wasn't exactly sure on how to describe the damage
|
Re: Rear end troubles
How does the pinion look? Was there any chunks laying on the bottom or was it clean. if no signs that the pinion did that damage then it must have been changed. I'd put it together and use it 'if it were mine' as long as it wasn't giving any problems earlier, unless you can get one for a reasonable price locally. ( as I said, if it were mine )
|
Re: Rear end troubles
Thats more than a "scratch" ,, Id replace it
|
Re: Rear end troubles
If the pinion is not really hammered looking, I wouldn't worry about it. But if it makes you feel better to replace, open carrier used is pretty much a gimmee item. Now a good time to consider upgrading to a limited slip.
Posted via Mobile Device |
Re: Rear end troubles
I blew up the pic and looked at the ring gear closely, it looks like the ring gear has been wearing wrong, it must be the original one. doesn't look good, ( unless I'm seeing it wrong) only you can see it better. I think I would change it after all..
|
Re: Rear end troubles
When I felt the pinion it had sharp edges but no chunks out of it. It is an original gear set from 72.
|
Re: Rear end troubles
5 Attachment(s)
here's a few pictures of the Carrier I have, just to show the condition of it.... of course, you will want to replace the bearings when you go to reinstall it, also, I couldn't find the C Clips, you can reuse your old ones.
Ben:metal::metal: |
Re: Rear end troubles
With that much metal in the oil, your oil would have looked like bass boat gel coat. your bearings would/should have been toast. Unless that is old damage since repaired.Check your bearing fits. if that is old damage run it!
|
Re: Rear end troubles
Ouch. The rear end on my brand new Z06 with 500 miles just went... hope it's not as broken as yours!
|
Re: Rear end troubles
Bummer davepl, too much power? should be covered, right?
|
Re: Rear end troubles
Quote:
|
Re: Rear end troubles
"""but they are on national backorder""" is this because its a defect/common thing happening to the vets?
|
All times are GMT -4. The time now is 10:40 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com