GM Pulse Generator for electroc speedo
1 Attachment(s)
This a new part. They list for $129 from DD, I will take $80 shipped. I had 2, and still have one left!
The missing piece of the increasingly popular early-GM transmission swap! With late-model GM transmissions containing an internal speed sensor outputting 128,000 Pulses Per Mile, the stock 40-tooth (40 pulse per revolution) reluctor ring provided the factory ECM with a high frequency input. The SEN-01-128 can now recreate this missing high frequency rate when converting to an older style transmission with a mechanical speedometer output. With a standard female 7/8” thread-on fitting, the SEN-01-128 fits all GM transmissions with a mechanical speedometer cable outlet. Removable weather-tight 10’ cable provides for simple installation and cable routing. 128,000 Pulse Per Mile Sine Wave signal output is direct replacement for the stock GM internal speed sensor, allowing the ECM receive the signals it needs for proper operation. Fits GM transmission models with 7/8” Male Threading, ie: TH350, TH400, 700r4, 2004r, etc. http://www.dakotadigital.com/index.c...rod/prd916.htm |
Re: GM Pulse Generator for electroc speedo
bump
|
Re: GM Pulse Generator for electroc speedo
1 Attachment(s)
im interested but have some ?s. i have a 5.3/700r4 with VDO Vision Series Speedometers 437155. not connected, an using my phone gps. is this what i need. an which way would i hook it up
1-Pin Number 1. Not used 2. Red wire from Hall Effect sender 3. Ground and black wire from Hall Effect sender 4. 12V Switched 5. Not used 6. White wire (split) from Hall Effect sender 7. Not used 8. White wire (split) from Hall Effect sender 2-Pin Number 1. Not used 2. Not used 3. Ground 4. 12V Switched 5. Not used 6. Not used 7. Sender wire 8. Sender wire 3-Pin Number 1. Not used 2. Not used 3. Ground 4. 12V Switched 5. Not used 6. Not used 7. Not used 8. Sender wire |
Re: GM Pulse Generator for electroc speedo
Quote:
Here are the directions to the sensor: http://www.dakotadigital.com/PDF/SEN-01-128.PDF Looks like you have a 12V power, GRND and the sensor output. Which matches up to #3. Let me know. Rob |
Re: GM Pulse Generator for electroc speedo
Quote:
|
Re: GM Pulse Generator for electroc speedo
Yes. But strap on cash right now. Don't get paid till Wednesday. I'll check back then to see if it hasnt sold
|
Re: GM Pulse Generator for electroc speedo
Quote:
|
Re: GM Pulse Generator for electroc speedo
Will it work on the 5.3L with NV4500?
|
Re: GM Pulse Generator for electroc speedo
Quote:
|
Re: GM Pulse Generator for electroc speedo
Quote:
|
Re: GM Pulse Generator for electroc speedo
Hi HART ROD. if you can send me your paypal or how to pay. I can send the $ around 3-4am, an when would you be able to ship. hoping to try to have before the wkend when i go out town for a show. thanx you in advance
|
Re: GM Pulse Generator for electroc speedo
Quote:
|
Re: GM Pulse Generator for electroc speedo
its k just ship it regular. doubt i would have time to actually get it put on in time cuz of work. ill send the $ in morning. thanx again
|
Re: GM Pulse Generator for electroc speedo
Quote:
|
Re: GM Pulse Generator for electroc speedo
payment sent
|
Re: GM Pulse Generator for electroc speedo
Quote:
|
Re: GM Pulse Generator for electroc speedo
Quote:
Quote:
|
Re: GM Pulse Generator for electroc speedo
Received the part. Thanx again Hart Rod
|
Re: GM Pulse Generator for electroc speedo
Quote:
I have one more left! :D |
Re: GM Pulse Generator for electroc speedo
Bump
|
Re: GM Pulse Generator for electroc speedo
2 Attachment(s)
thanx again HART ROD. finally got around to installing last wk. gauge is finally working.
|
Re: GM Pulse Generator for electroc speedo
Quote:
|
Re: GM Pulse Generator for electroc speedo
bttt
|
Re: GM Pulse Generator for electroc speedo
If it only fit and worked on an nv3500. Ugh good luck!
|
Re: GM Pulse Generator for electroc speedo
Quote:
|
All times are GMT -4. The time now is 03:04 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com