72 progress pics
finally going back together
|
Re: 72 progress pics
4 Attachment(s)
Before
|
Re: 72 progress pics
5 Attachment(s)
Getting work done
|
Re: 72 progress pics
5 Attachment(s)
Nm
|
Re: 72 progress pics
Looks great!
|
Re: 72 progress pics
Quote:
|
Re: 72 progress pics
1 Attachment(s)
wish i had torched the home made hitch frame first. can anybody tell me if it was a double wall top by the spid? doesnt have the brackets to mount bedside panels
|
Re: 72 progress pics
Very nice, I know it takes a lot of work to get to that stage.
Good luck, Rg |
Re: 72 progress pics
Quote:
The only clues on the SPID are the build plant and sequence #. To date, only Flint built K5s have been shown to leave GM with 1x wall tops and only those with later sequence #. Based on the available data, your blazer was originally equipped with a 1x wall top. I'd ask folks with 72 k5s that have original tops to contribute to this thread that tries to nail down when the switch from 2x wall to 1x wall occurred: http://67-72chevytrucks.com/vboard/s...d.php?t=701826 |
Re: 72 progress pics
2 Attachment(s)
I thought 72 blazers had the mirror glued to windshield. Mine is attached to winshield frame.
Wheels will be switched to rallys off my parts truck soon, emblems and trim, replumb vents then install the retro radio. Just in time for topless weather. My most pressing issue is the atf dipstick tube leaking where it goes in trans pan. Its aftermarket chrome and wont seal. O rings, rtv etc--nothing doing. I always lose atf where i park it. Any suggestions? Thanks |
Re: 72 progress pics
Quote:
I had the same issue on a Chrome ATF tube as well. I pulled it out, and sand blasted the end of the tube that goes into the transmission. After that I painted it and then reinstalled it with some black silicone... I should have got new o-ring gaskets. It worked good for a while, but started to weep after a year or so. It was also my daily driver. I ended up going back to a stock tube, lol. I think there may be a diameter difference with the chrome one being smaller. |
Re: 72 progress pics
Quote:
i m going to find a steel tube somewhere |
Re: 72 progress pics
4 Attachment(s)
Spid decal went well thanks to jeff at out in the shop
|
Re: 72 progress pics
Awesome. Just in time for driving season!
|
Re: 72 progress pics
thats a NICE lookin K5. Can't beat the classic rallye rims either. well done. Cant help but notice the old Full-Size Bronco in the background, looks like a nice little rig as well.
|
Re: 72 progress pics
Quote:
|
Re: 72 progress pics
Quote:
. I like my 79 bronco too. If it looked as good as it runs i'd have pics of it on here too |
Re: 72 progress pics
Looks awesome!! Is the grill shell aftermarket? if it is how did it fit?
|
Re: 72 progress pics
Quote:
Yes, its new aftermarket and i think it fit great |
Re: 72 progress pics
Nice work - more pics please
|
Re: 72 progress pics
2 Attachment(s)
Quote:
|
All times are GMT -4. The time now is 02:25 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com