The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   The last piece of the puzzle.-mufflers (https://67-72chevytrucks.com/vboard/showthread.php?t=744403)

jbgroby 08-12-2017 08:35 AM

The last piece of the puzzle.-mufflers
 
1 Attachment(s)
Finally made it past the bar, having the pipes tied in. I'll flip a coin as to whether I get duals or a single pipe setup. I'm sure my neighbors appr. the wakeup call ;)

pimpston65 08-12-2017 08:38 AM

Re: The last piece of the puzzle.-mufflers
 
Quote:

Originally Posted by jbgroby (Post 8014844)
Finally made it past the bar, have the pipes tied in. I'll flip a coin as to whether I get duals or a single pipe setup. I'm sure my neighbors appr. the wakeup call ;)

bright and early waiting for the muffler shop to open, before the cops have their morning donuts.

jbgroby 08-12-2017 09:05 AM

Re: The last piece of the puzzle.-mufflers
 
Hate to get a ticket on her maiden flight, this is the first time she hit the highway since 2007.

pimpston65 08-13-2017 08:30 AM

Re: The last piece of the puzzle.-mufflers
 
Quote:

Originally Posted by jbgroby (Post 8014859)
Hate to get a ticket on her maiden flight, this is the first time she hit the highway since 2007.

how'd the install go?

jbgroby 08-13-2017 09:31 AM

Re: The last piece of the puzzle.-mufflers
 
Very well, I changed the older 1qt. Filter canister over to a spin-on adaptor. He could not quite route the same way, but he also wanted to make sure I could access the transmission pan as well. I'll post some pics later.

pimpston65 08-13-2017 01:40 PM

Re: The last piece of the puzzle.-mufflers
 
Quote:

Originally Posted by jbgroby (Post 8015475)
Very well, I changed the older 1qt. Filter canister over to a spin-on adaptor. He could not quite route the same way, but he also wanted to make sure I could access the transmission pan as well. I'll post some pics later.

theres a guy close to me(3hr drive) that prebends them to factory specs. i got one for my 65 with a 283 and it fit almost perfect, had to have the tail piece bent downward a bit but more. cost a little less then $300 for the whole setup down tube correct muffler and tail section. ima have him bend up a setup for my 66 4x4 burb with I6 oh i did have the nos y-pipe for the 283, but its a single down pipe for the I6


All times are GMT -4. The time now is 10:16 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com