c10 c-notch
at what point do I need to worry about a c-notch? I have a coil sprung truck and 3" drop springs,, i may even go to 5's if it looks better.
|
Re: c10 c-notch
To cut a frame for a couple inches is nuts.
You can get the look without the plasma |
Re: c10 c-notch
67chevemall, I disagree, there's only so low you can go without modifying the frame in some way (without other serious mods).
skymangs, I have a 6" drop with no c-notch, and very seldom bottom out. You should be fine with a 5" drop. Good luck, Rg |
Re: c10 c-notch
cool, I'm not gonna cut the frame, I'm asking how low I can go without a c-notch.
|
Re: c10 c-notch
In my experience 6" is the maximum. Some guys say they bottom out at 6" over bumps but I think it has a lot to do with your springs rates and shocks.
Rg |
Re: c10 c-notch
thanks
|
Re: c10 c-notch
Ya mine was real low on bags and never bottomed out.
I would never cut a frame. But now that I am old and wise it is all stock now baby. |
All times are GMT -4. The time now is 04:57 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com