The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*72longbed* · 11-21-2004, 12:35 PM

This is great info, Thanks!! So let's see if I understand, Advance Adapters can supply me with either the proper output shaft for my 700R4 to fit a T350 ready NP205 transfer case, or they can sell me the Adapter itself to mate up a T350 ready NP205 transfer case to my stock 700R4, right??

If I was to use the adapter only and my 700R4, this would probably require sliding the crossmember back and changing the driveshaft lengths, front and rear, right??

Let me know if I'm on the right track here guys, and thanks for your help, this is good stuff!!

72longbed

11-21-2004, 12:35 PM	#5
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	This is great info, Thanks!! So let's see if I understand, Advance Adapters can supply me with either the proper output shaft for my 700R4 to fit a T350 ready NP205 transfer case, or they can sell me the Adapter itself to mate up a T350 ready NP205 transfer case to my stock 700R4, right?? If I was to use the adapter only and my 700R4, this would probably require sliding the crossmember back and changing the driveshaft lengths, front and rear, right?? Let me know if I'm on the right track here guys, and thanks for your help, this is good stuff!! 72longbed Last edited by 72longbed; 11-21-2004 at 01:06 PM.