The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

DirtyBurb86 · 12-06-2005, 04:28 AM

OK, the general consensus seems to be the striker/bushings. I tried wrapping electrical tape around the striker (there is no bushing), but it didn't do the trick. I'll get some new bushings from HELP! products or try the 5/8" hose if I can't find any. If that doesn't do it, I'll try adjusting the striker itself. Thanks for all the help y'all, I'd be screwed without ya. I'll report back with what works out.

Thanks again,
Shawn

12-06-2005, 04:28 AM	#8
DirtyBurb86 Narcissistic Prick Join Date: Dec 2004 Location: So Cal Posts: 87	Re: Door Won't Close Securely... OK, the general consensus seems to be the striker/bushings. I tried wrapping electrical tape around the striker (there is no bushing), but it didn't do the trick. I'll get some new bushings from HELP! products or try the 5/8" hose if I can't find any. If that doesn't do it, I'll try adjusting the striker itself. Thanks for all the help y'all, I'd be screwed without ya. I'll report back with what works out. Thanks again, Shawn __________________ '86 GMC Suburban K2500, 3/4, 4x4, 350/400, 4" susp lift, 35" BFG M/Ts '96 Oldsmobile Aurora, Pure Luxury!!! '03 Mazda6 Sport, V6, 240hp Dead Stock