The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JESSEGALLEGOS · 01-15-2007, 12:31 AM

It still needs work. I need to have the drive shaft shorten, looks like the rear end is shot. I can see a shape of a gear on the rear ends housing.

I can also move the back tires back and forth about 1/4". I need to find a way to refasten the rear sway bar and rear helper air bags.

here is a before
31/11.5x15 with a 3 " suspension lift.

20s

rear dropped

some what finished

As you can see the jack is holding the rear up. It sits to low

suspension settled

01-15-2007, 12:31 AM	#1
JESSEGALLEGOS Registered User Join Date: Jul 2001 Location: LAKE PLACID FLORIDA Posts: 95	finally lowered it It still needs work. I need to have the drive shaft shorten, looks like the rear end is shot. I can see a shape of a gear on the rear ends housing. I can also move the back tires back and forth about 1/4". I need to find a way to refasten the rear sway bar and rear helper air bags. here is a before 31/11.5x15 with a 3 " suspension lift. 20s rear dropped some what finished As you can see the jack is holding the rear up. It sits to low suspension settled __________________ 1982 BLAZER 2WD http://img.photobucket.com/albums/v7...t/145c37fd.jpg Last edited by JESSEGALLEGOS; 01-21-2007 at 11:48 AM.