Quote:
Originally Posted by LUV2XCLR8
Still trying to understand this all also, it looks like w/ stock arms (71) that
I can't cut my cups that much like Frizzle said, but I also remember him in
another post saying he had to trim his Swaybar cause it was into the bag,
mine is not, maybe I have a slightly more slender set of bags? I need a lil
more of the front, this is the aired out pic with the 15's and then the 17's
you can't see the back but it needs to come down more, but if I do that I
will be inverted  I just wanna know what tall cups are? 1.5" or 2.0" so
I can decide how much mine need to be trimmed, or I might just get arms. |
If you look at the pics FF posted, you can see where the bag sits in the lower arm. If your cup sticks up above that, you can trim it to sit a little lower than flush (as he has). The trick is to get your cups as close to the arm.
I think any less than that you run the risk of the bag touching the arm.
At least that's my understanding.
Compare this picture to the one of FF's install. See how much of the cup is visible above the lower arm?
You could cut about a 1/2" or so off the cups in this picture.