The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

LUCKIN-FOU · 02-07-2008, 01:01 PM

I started this frame the other day, I always wanted to this. I cut 2" out of the stock cross member. I'll take care of the center link later.

I'm building this chassis with left over steel from other jobs. For now I'll use the stock control arms for mock up.

The center of the frame will be 2x4 .083 wall with .50x2" for the bracing

I raised it up to ride height then tacked some stands under it

I'll post some more pictures later on

02-07-2008, 01:01 PM	#1
LUCKIN-FOU I'M NOT SCARED I HAVE A PLASMA Join Date: Feb 2008 Location: The PLACE Posts: 172	For your viewing pleasure I started this frame the other day, I always wanted to this. I cut 2" out of the stock cross member. I'll take care of the center link later. I'm building this chassis with left over steel from other jobs. For now I'll use the stock control arms for mock up. The center of the frame will be 2x4 .083 wall with .50x2" for the bracing I raised it up to ride height then tacked some stands under it I'll post some more pictures later on __________________ Lou Santiago US Navy Retired/World Traveler Car Builder/Welder/Airport Investigator garageinsidertv.com [FORUM] WORK IS FOR PEOPLE WHO CAN'T FISH. I GUESS I'M SCREWED BECAUSED I HATE FISHING.