Continuation....
I tore down the 454 to get it ready for the rebuild. Atleast the top end anyways, assuming rotating assy is ok. Block is virgin 2 bolt. Here's a few pics.
Before pressure washing
After
781 Heads.. going to Louisville on Friday for 4 angle and new 2.190s/1.880s and all the trimmings. (Brother is a machinist) - Cuts down on labor costs
And to top it off Friday, some of my parts started to "flow" in.
7561 RPM Air-Gap Intake
1407 CARB
Comp Cams XE274H-10 552/286
Comp Cams Timing Set
Lots of work to do before spring... Kenny