The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JimKshortstep4x4 · 07-05-2008, 05:12 AM

Are you referring to the metal parts of the bows or the plastic strips? The metal is screwed to the lip that is on the outside. The plastic parts are snapped in place. If you have not removed the bows yet, make sure that they are identified with their location as in numbering them from front to rear.

Jim

07-05-2008, 05:12 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: 'burb roof bows Are you referring to the metal parts of the bows or the plastic strips? The metal is screwed to the lip that is on the outside. The plastic parts are snapped in place. If you have not removed the bows yet, make sure that they are identified with their location as in numbering them from front to rear. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC