The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68 short step · 07-17-2008, 06:47 PM

it is a 18" dual row cooler, can be got from summit, jegs, ebay, etc.....
i use -6 AN fitngings and -6 braided lines, these too came from summit/jegs......compaired to the "traditional" rad. mounted ones
this cooler is designed to disapate heat by haveing BOTH internal and external heat dissipating fins also this heat sink design produces high heat transfer with minimal airflow... unlike the traditional radiator mounted ones..... haveing said that it is designed for a non-lockup converter trans cooling needs, so with a lock-up converter, it should work out really well..

07-17-2008, 06:47 PM	#204
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E it is a 18" dual row cooler, can be got from summit, jegs, ebay, etc..... i use -6 AN fitngings and -6 braided lines, these too came from summit/jegs......compaired to the "traditional" rad. mounted ones this cooler is designed to disapate heat by haveing BOTH internal and external heat dissipating fins also this heat sink design produces high heat transfer with minimal airflow... unlike the traditional radiator mounted ones..... haveing said that it is designed for a non-lockup converter trans cooling needs, so with a lock-up converter, it should work out really well..