The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Need help with wiring stock temperature and vacuum gauges

red71cheyenne · 03-31-2009, 06:44 PM

Yep, just verified it on the original drawing here:
http://www.geocities.com/chevroletc1070/wiringdias.html

It does run thru the ignition switch then right up to the dash connector. So, key has to be on for it to work, remember that in your troubleshooting.

Jeff.

Oh, and any terminal spade will work as long as its the kind of u-shaped one. You can get them at Napa, Wal-mart or anywhere that sells connectors.

03-31-2009, 06:44 PM	#25
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Need help with wiring stock temperature and vacuum gauges Yep, just verified it on the original drawing here: http://www.geocities.com/chevroletc1070/wiringdias.html It does run thru the ignition switch then right up to the dash connector. So, key has to be on for it to work, remember that in your troubleshooting. Jeff. Oh, and any terminal spade will work as long as its the kind of u-shaped one. You can get them at Napa, Wal-mart or anywhere that sells connectors. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty Last edited by red71cheyenne; 03-31-2009 at 06:46 PM. Reason: More info.