The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jmuck · 06-09-2009, 10:25 AM

Get the lines as long as you can b/c the less fittings the less problems with leaks. That is the good thing about buying a roll of line you will have no fittings in the middle of the frame. You can get a tubing bender from Jegs or Summit for less than $10.00 but if your local auto parts has one for a little bit more it would be worth getting it from there b/c you have no wait time and no shipping cost.

06-09-2009, 10:25 AM	#48
jmuck Registered User Join Date: Mar 2006 Location: Nacogdoches, Tx Posts: 167	Re: My '87 SWB Project w/pics!! Get the lines as long as you can b/c the less fittings the less problems with leaks. That is the good thing about buying a roll of line you will have no fittings in the middle of the frame. You can get a tubing bender from Jegs or Summit for less than $10.00 but if your local auto parts has one for a little bit more it would be worth getting it from there b/c you have no wait time and no shipping cost.