Re: Tbi swap build thread
Well I got to work on the old truck today. Got a little done before I had to quit.
First I untangeled the harness a litle more. I cut all the tie points on the harness and re soldered them so they are all untangeled, and i can route the harness some time this week hopefully. THe first pic is what you will find with a stock tbi harness with all the tie points. They are crimped and covered with tape from the factory. The pic has a sample of both.
Second I got the oil sending unit and switch fixed. I went to the parts store and got an brass adapter to adapt my oil switch to the tee threads. Problem sloved.
Third I instaled the intake on the motor I to use anouther intake than the one in the pic above because I found a crack in on of the back bolt holes. So I was thankfull that I had a spare. You can see in the last pic of the oil switch and sending unit instaled on the block. Stay tuned.
__________________
The fleet
94 Chevy 4x4 reg cab
2018 Traverse (wifes car)
1977 SWB stepside
1949 Chevy truck
|