If you cant tell......its 110*. I also wanted to put out some general info that I discovered today. I bought power window regulators a couple years ago and I finally decided to scope 'em out. Looks cool and not too difficult at all....but here's what I found. I have the Electric Life kit for 64-66. You must drill to mount the motor assembly and it
leaves 3 screws exposed thru the door!!!!. 2 will fall in the lower portion of the door and 1 falls in between the raised area and the door panel. I dont care that much, but I could see some people being very upset with it.
Decided to knock out the front clip with the 'bodymans palm pilot'
...used some 180 and went to town. My front clip is in good shape and will take the least amount of work so I just decided to hit it and quit! Need to do the corners, edges and small work but it was nice to get the majority knocked down in about 2 hours. I'm trying to keep up with shortbed 70
...not really. Put in some more effort on the doors and will be repairing the drivers door soon.
Also got to use the round Durablock as Alan suggested in the 'indent' of the door and it worked nicely. I'll probably go back over that area of the bed before primer gets stuck. Enjoy. (Notice my Craigslist find= 36'' Maxx Air fan)