Quote:
Originally Posted by menace121978
so for the fuel lines just use fuel injection hose and clamps,
|
I haven't looked to see what the OEM fuel line sizes are on the truck right now, but I will either run hard line from the filter/reg up to the fuel rails, or stainless braided. I just don't feel good about running the regular soft FI hose all the way. But definitely FI line to make connections with the smooth stainless FI clamps.
Quote:
acdelco "in take" pump and sending unit w/ a high pressure switching valve?
|
Yup. In fact, when I'm done typing this post, I'll go copy a PM I sent to AceX with parts and part numbers for the fuel system parts with dual tanks.
Quote:
will i need the corvette fuel filter to regulate the pressure also?
|
You will if your engine uses a returnless fuel system. That's easy to tell.... if the fuel rail has two lines together pointing to the rear, one is a return, so no Vette filter/reg. If there is only one line on the rail, then yes you will. A returnless is preferred, at least for me. Only 1 line to run instead of 2. Less hassle, and less $$$.