|
Re: Tbi swap build thread
The car TBI computer is a little different than the truck version because the car computer does additional things the truck one doesn't (like electric fans) but it will work just fine in the truck swap, actually better.
Check out thirdgen.org for tuning the engine after the swap. The guys over there are very knowledgeable about the TBI motors and computers.
K.S. is knock sensor. It is on the block down by the starter threaded into the water jacket.
The Buick should be plenty big enough to allow you to use its wire harness and get the ECM into the cab of the truck. It must go inside as it is not weather resistant.
|