|
Re: Tbi swap build thread
Quote:
Originally Posted by 68 TT
You really need to data log what is going on to know what the ECM is seeing that makes it run poorly when cold then clean up when the engine gets up to temp.
It sounds like an open loop vs. closed loop issue to me. The CTS is a possible source giving the ECM faulty info but there could be several other causes.
Data logging is a good place to start. It helped me diagnose a vacuum leak that two mechanic friends thought was a fuel system issue. It will also let you see where you can fine tune the programming to suite your particular setup.
|
Agree - get ALDL cable and WinALDL program. It is must for any TBI equipped car or truck!
//RF
__________________
"The Beast"
1975 Chevrolet C20 longbed
350/ 700R4! with 3inch body lift
Dual Flowmasters Super 40's!
TBI retrofit completed (2007-07-29) 
New 383CID (+030) 08-304-8 9.5:1CR x36,005 (2012-12-17)
|