Hi guys, Almost done with the TBI insatll.
I have a few more questions:
1) B2 gray wire...goes to oil pressure, and fuel pump relay....does it also power the fuel pump?
2) D6 Ground wire...also connects to A12...Book says 02 ground?..Putting in a 4 wire 02 sensor..do I use D6 for the ground?
3) A6 book says "hot in start OR run" where do I run this wire? Fuse? what size fuse?
4) B1 and C16 same orange wire...12 volts? where do I run this wire? Fuse? Size fuse?
5)Where do I run the large pink wire from the top of the coil? Fuse? What size fuse? Do I hook it to the wire that came off the old Dizzy?
6) The instructions with the VSS say to ground it to the ECM....where should I ground it ( what number wire)?
7) C9 puirple wire to small starter terminal...I belive my starter has two small terminals (could be wrong) are they labled? if so which on do I connect C9 to?
What size wire? Fuse? What size fuse?
8) 4 wire 02 sensor (AFS75 AC/Delco)
Wire code on 02 sensor=
A=White
B=Blue
C=Black
D=black
Where on the relay do these wire connect?
My eletrical knowledge is VERY liminted...so please keep all answers as SIMPLE as possible.
Thank you all for keeping this post going
