The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

pancake · 10-17-2009, 03:45 PM

IT LIVES....

Got the truck started today..

It runs but not very well....

It is putting out two codes:

Code 44 and code 42

Code 42 is interminted....sometimes it will show...sometimes it wont.

Code 44 is constant

I did set the timing at 0 TDC with the pin unpluged..

It will idel up then down then up then down ect...and it is backfiring through the exaust.

The injectors also seem to be makin a loud clicking noise...almost like the sound a bad lifter makes. Don't know if this is related.

Any input would help...thanks again for all the help.

10-17-2009, 03:45 PM	#320
pancake Registered User Join Date: Apr 2009 Location: Arvada, Colorado Posts: 84	Re: Tbi swap build thread IT LIVES.... Got the truck started today.. It runs but not very well.... It is putting out two codes: Code 44 and code 42 Code 42 is interminted....sometimes it will show...sometimes it wont. Code 44 is constant I did set the timing at 0 TDC with the pin unpluged.. It will idel up then down then up then down ect...and it is backfiring through the exaust. The injectors also seem to be makin a loud clicking noise...almost like the sound a bad lifter makes. Don't know if this is related. Any input would help...thanks again for all the help. Last edited by pancake; 10-17-2009 at 03:47 PM.