Quote:
Originally Posted by nuke1
Ok, now that i am at home and can look at the pics, One helpful hint for the day, The seam sealer, use masking tape to make the line that you want to go around the cab with. On the inside edge and on the outside drip rail so none gets on it. Place your seamsealer and use some rubber gloves, or your finger. Next depending on the type of seam sealer, either wet your fingers with water or thinner, reducer and run your fingers along the seam sealer, just like when you do a bath tub surround. TRhis will give you a nice flowing look and then take the masking tape off right away, DO NOT let it sit there and let the sealer harder, will never look right or lay down right. Nite.
Good luck, and it is definetly coming along. James
|
Thanks for the tip James. I had not thought of taping it, but it makes sense.