Re: Throttle Mashing hesitation?
Okay Update for everyone. I had my buddy do a code scan through my OBD port and this is what we found.
|Code#|System| (Indicating)
|13|Oxygen Sensor Circuit| (No signal to computer)
|22|TPS| (Low Signal Voltage)
|32|EGR| (EGR system failure)
|35|IAC - Idle Air Control Motor| (Idle speed above/below desired idle speed)
__________________
1972 3/4 Ton Cheyenne Super, 350ci 650 cfm Edelbrock 4bbl Performer AVS, Edelbrock Torquer intake manifold, Headman Longtube Headers to 2 1/2in cutouts to 3 inch flowmaster super 40's true dual. 4.10? Rear SM-465/205 transfer case. Now this one is busted!! http://s59.photobucket.com/albums/g2...k/1972 Pickup/
1995 K1500 Silverado 5.7L 350 TBI with 1in swirl torque spacer, Flowtech shorty headers, 3 inch collectors to y pipe going to 3in highlfow cat converter, single offset passenger side outlet, full 3 inch setup from collectors. Edelbrock High Flow 255LPH/67GPH Fuel pump, adjustable fuel pressure regulator and gauge, running at about 18psi. 3.73 Rear 4L60-E 4 speed auto (Rebuilt) http://s59.photobucket.com/albums/g2...1995%20Pickup/
|