[68 TT]

Originally Posted by propanemudtruck

Nice work so far. I'm doing a similar project in the 4x4 section, with a short short wheelbase final product for an ultimate plow rig. It's the same as the K5 wheelbase but using a K10 frame to start with. In my build link you can see that I took the kickup right out of the frame to get away from modifying the body with notches or anything for body/frame clearance. With two truck frames I think this might make for a nice LWB or SWB truck, just cutting the kickup right out.

Good Luck!

I originally was going to make a K5 wheel base ultra short bed truck using the 84 K5 Blazer chassis but decided I wanted the truck to be more useful around the house so I went with the K10 chassis instead.

I don't care for the look of a long bed C10 but as a 4x4 it doesn't look too bad so I may just leave it as a long bed now instead of doing the extra work to make it a short bed. I did leave enough straight area of frame under the bed to be able to cut out the extra 12" to make it a short bed if I change my mind in the future.

I will take a look at your build and see what you have come up with.