The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Longhorn Man · 08-12-2010, 11:16 PM

i think you unplugged the wrong harness. It sounds like you unbolted the main harness on the backside of the fuse box. I believe they wanted you to unplug the tail light harness which is towards the right of the throttle pedal and up. It has 4 wires, brown, light green dark green and yellow. This will disconnect all the lights in the back of the truck.
However, after hearing that the dome light assembly is missing, I think that is your problem. Look at the fuse box. You'll see a plug with an orange wire and a white wire. unplug it. This goes to your missing dome light.

08-12-2010, 11:16 PM	#18
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: popping glass fuses i think you unplugged the wrong harness. It sounds like you unbolted the main harness on the backside of the fuse box. I believe they wanted you to unplug the tail light harness which is towards the right of the throttle pedal and up. It has 4 wires, brown, light green dark green and yellow. This will disconnect all the lights in the back of the truck. However, after hearing that the dome light assembly is missing, I think that is your problem. Look at the fuse box. You'll see a plug with an orange wire and a white wire. unplug it. This goes to your missing dome light.