|
Re: Which bag brackets?
Quote:
Originally Posted by Shane
bolt in the top plates and then bolt the bags to it ... bolt the lower cup to the bottom of the bag and just sit in the pocket in the lower a-arm ... you're good to go.
no need to weld or bolt the cup to the lower arm ... it's being held in place with the bolt in the top.
|
x2.
For the rear you can bolt the bags in place of the coils (if you drill the requisite holes in the frame for mounting & the air fitting) or you can make a 'hat' that allows bolting the bag in using the stock coil mounting holes. The 'hat' method will limit drop vs. the drilling & direct install.
Don'f forget the need for an adjustable Panhard bar (the longer the better) & some shock relocators.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
Last edited by SCOTI; 08-14-2010 at 05:35 PM.
|