[Stitch]

I called you before I read this. You can pm me when to call you and I'll call you tomorrow. Also the ring terminal is small like 1/8 to 3/16 inside diameter size. I didn't even think to check on the fan shroud for the emissions crap. There's one hose close the intake manifold and it is attached to the sensors to the right in the picture or near the rest of the motor. The sensors are only aBout an inch apart. There's a vacuum
line that comes from the drivers side. I think it's the vacuum canister that I hooked up right under he mouth of he throttle body. I looked at previous pictures from the motor and the drivers pcv valve goes to a hole in the air cleaner tube. There's a pcv valve in the pass valve Cher that goes to the throttle body or intake right where the throttle body mounts. Can't remember which one it hooks to right now

I can check on the wire color forctje ring terminal on the morning