The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

djracer · 08-25-2010, 05:58 PM

I thought that a detroit locker would be the ticket for the street but if the tire still grabs when you turn then all you did was pay 3 times as much as a spool and you still have a spool. I will sell mine without a center section or just without the spool.

I also have another set of axles for a barely narrowed nine inch but they are 5 on 4.5 lug pattern. They are gun drill star flanged moser 35 spline extreme axles with bearings and 5/8 studs. I would take 500 obo and they are 750 new with everything included.

08-25-2010, 05:58 PM	#33
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Help me build my rear end!!! I thought that a detroit locker would be the ticket for the street but if the tire still grabs when you turn then all you did was pay 3 times as much as a spool and you still have a spool. I will sell mine without a center section or just without the spool. I also have another set of axles for a barely narrowed nine inch but they are 5 on 4.5 lug pattern. They are gun drill star flanged moser 35 spline extreme axles with bearings and 5/8 studs. I would take 500 obo and they are 750 new with everything included. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!