10-23-2010, 09:50 AM
|
#29
|
Registered User
Join Date: Aug 2009
Location: pensacola florida
Posts: 143
|
Re: which one would you build?
well been working as much as possible on the truck, got alot done this week
got my wiring started, all 1/0 grounnds and power leads[IMG]
http://img813.imageshack.us/img813/7897/pa090317.jpg[/IMG]
By grasshoper at 2010-10-10
By grasshoper at 2010-10-10
300 amp fuses, laying the ground work for the stereo system
By grasshoper at 2010-10-21
fuses mounted, on some scrap aluminum , put some detailinng into these with a wire brush trying to achieve a scalloped look
also wired up the controller for the twin e-fans, and mounted the radiator and fans permmanently! no more mock up
By grasshoper at 2010-10-21
all the stainless braid hoses are going in, magna clamps on the ends, looks real clean
By grasshoper at 2010-10-19
drive shaft went in after being shortened by 2 inches, balanced and new carrier bearing, and all new heavy duty u joints
By grasshoper at 2010-10-19
By grasshoper at 2010-10-19
some more pics of the install, I know im all over the place on this but theres so much to show,
By grasshoper at 2010-10-19
had to massage the header with a bfh to gain clearance for steering shaft
By grasshoper at 2010-10-10
By grasshoper at 2010-10-19
so to sum it up the motor and tranny are in and all the plumbing is on , gonna work on the wiring harness, and then replace the stock gauge cluster with a set of autometer gauges , lots more work to do but lots of progress made stay tuned for more pics and maybe a little video.
give me some input, dont just look give me some feadback!! good , bad , or even ugly!!!
|
|
|