Quote:
Originally Posted by Street3285
I will be using an Accell HEI, but I was curious if I could tap off of the 4-plug connection to get the 12v going into it.
|
The CCC four pin connector does not have +12 Volts. It only has the following ECM I/O signals:
Wire Color | Connector Pin | Function
Purple/Wht..| B | Distributor Reference pulse
White.........| A | EST
Tan...........| C | Bypass
Black/red....| D | REF_LOW
Power to distributor is provided via single large gauge (10AWG) pink wire that plugs into BAT terminal into the hat (next to the three wire jumper)
//RF
__________________
"The Beast"
1975 Chevrolet C20 longbed
350/
700R4! with 3inch body lift
Dual Flowmasters Super
40's!
TBI retrofit completed (2007-07-29)
New 383CID (+030) 08-304-8 9.5:1CR x36,005 (2012-12-17)