The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*scottsdaleowner75* · 11-29-2010, 04:53 PM

Look into off road designs sway bar disconnect kit. Gives you the best of both worlds. Easy to install and will allow you to run the sway bar on the street. Beware the Rough Country kits ride STIFF. Also while you are at it replace the outer tie rod ends and both links from the steering arm and pitman arm. Then align. This will give you the best steering available with the stock setup. Also check the rag joint and steering shaft. If you can google XJ steering shaft upgrade. Great upgrade.

11-29-2010, 04:53 PM	#37
scottsdaleowner75 Account Suspended Join Date: Mar 2010 Location: So. Cal, Inland Empire Posts: 199	Re: BREAKAGE: Wanna know what causes this? Look into off road designs sway bar disconnect kit. Gives you the best of both worlds. Easy to install and will allow you to run the sway bar on the street. Beware the Rough Country kits ride STIFF. Also while you are at it replace the outer tie rod ends and both links from the steering arm and pitman arm. Then align. This will give you the best steering available with the stock setup. Also check the rag joint and steering shaft. If you can google XJ steering shaft upgrade. Great upgrade. Last edited by scottsdaleowner75; 11-29-2010 at 04:58 PM.