The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - ** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built.

drewskiren · 12-05-2010, 10:07 PM

Grinding all the welds down still. Going back and welding again when I find a hole. First I have been grinding them pretty close with the cut off wheel, then finishing with the flap disk. The whole weld area will end up being lower than the adjacent areas slightly which will make it easy to have a thin layer of filler/ thick primer for blocking out before paint.

12-05-2010, 10:07 PM	#226
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Grinding all the welds down still. Going back and welding again when I find a hole. First I have been grinding them pretty close with the cut off wheel, then finishing with the flap disk. The whole weld area will end up being lower than the adjacent areas slightly which will make it easy to have a thin layer of filler/ thick primer for blocking out before paint. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife! Last edited by drewskiren; 12-07-2010 at 12:51 AM.