[Alan's Classic]

Originally Posted by likaroc13

those look great!

Appreciate it!!

Originally Posted by Palf70Step

Very Nice!

Thanks Bill!!

Originally Posted by Strodder

Man the passenger side looks tight. Is it OK, or do you have to trim a little?

Yeah, I need to trim some.

Originally Posted by Inverter

Nice headers. I have the LTs with that same ball collector.
Do it to it.

Thanks Troy

Getting back after it. Trying to get some small things rounded up that need paint. I never did find my other vent window frame that I thought I painted. I tore apart another one and blasted it. Still need to sand arounf the chrome strip.



Finally got around to trimming the front shroud so I could put my upper radiator hold downs in. Still need to drill and install a nutsert.





Stripped the front sheet metal off so I could access the header on the left side without scratching the inner fender. Plus now I can button up the engine a little easier.



Going thru the seals for the fender I found this seal and not exactly sure where it goes. I think it goes along the bottom of the inner fender. I've got the ones where the fender bolts to the inner. I also have the one between the inner fender and the radiator support. I still need the one between the inner fender and the cab. It wasn't in the kit.



Shannon was over working on his cab and had the camera and caught me.