|
Re: Delco radio with aux. input added
Glad you finally got it.
Post #1 is the ground. This needs to connect to the stereo body somewhere
Post #2 is the left channel out. This connects to the wire going into the amp board.
Post #3 is the left channel in. This connects to the wire coming from the main board.
Post #4 is the right channel in. This connects to the wire coming from the main board.
Post # 5 is the right channel out. This connects to the wire going into the amp board.
Main board is the one on the bottom, the amp board is the one on the side.
Just think of it this way, when the aux is unplugged the audio signal passes straight through into the switch then out. When you plug it in the contact is broken and the signal from the 1/8 plug is sent to the amp.
Just remember to have the power off when plug and unplug the aux.
Good luck and don't hesitate to pm me if you have any questions.
|