The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Installing a CPP C-Notch kit on a '66 shortbed

trustyrusty65 · 03-13-2011, 03:34 PM

Wow-very informative and in-depth for something that is so seemingly simple. This also took me much longer than I expected, just because of all the trimming and fiddling with hole alignment that was needed (drinking the PBR first was no help either). I filled in the edges with seam sealer rather than welding it so that I could remove it later (not entirely sure why though. . .) without too much hassle. My truck looks a lot like yours; ECE panhard/shock relocators, KYBs and 5-inch drop coils, not to mention the notch (no rear sway bar though). Thanks for elaborating this process. . .

03-13-2011, 03:34 PM	#3
trustyrusty65 Registered User Join Date: Feb 2011 Location: Reno Nevada Posts: 7	Re: Installing a CPP C-Notch kit on a '66 shortbed Wow-very informative and in-depth for something that is so seemingly simple. This also took me much longer than I expected, just because of all the trimming and fiddling with hole alignment that was needed (drinking the PBR first was no help either). I filled in the edges with seam sealer rather than welding it so that I could remove it later (not entirely sure why though. . .) without too much hassle. My truck looks a lot like yours; ECE panhard/shock relocators, KYBs and 5-inch drop coils, not to mention the notch (no rear sway bar though). Thanks for elaborating this process. . .