Re: Hi! my '59
Maybe this will help. Axle is 74 K10 truck mounted to bottom of spring with bolts up (RAncho kit). Red circle is the clip I welded on to use the original shocks. Yellow are the factory shock clips, pink is the hole and flat plate in the frame. I used the approximate angle and location as the stock 74 truck. One shows in red the stock upper bracket and where the first shock was. In that photo I had not added the 1/2" plate on the inside of the frame to beef up the mount. Its a lifted 4wd application but principle is the same.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
|