|
Re: 69 Custom 30 wrecker restoration
I got a few more parts on. The first pic below shows the lower front and rear pillars and the outer rocker in on the passenger side. All went well. I put the door back on to make sure everything is going where it needs to be.
Once that was confirmed, I finished this area by grinding all the plug welds down and using a little "icing" to blend it all in and a coat of gray primer. On to the other side...
__________________
Bob
63 Impala 283/PG/3.36 (under restoration)
66 Impala 327/PG/3.36
66 Chevelle SS 409/M22/3.55
69 Chevelle 307/PG/3.08 (future restoration)
69 C10 short stepside 454/TH350/3.73
69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!)
71 Cheyenne 20 fleetside 350/4 spd/4.10
71 Chevelle 6/PG/3.08
72 Chevelle 454/M21/4.10
|