The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 68 C-10 3 on-the-tree shifter rods

Dano69c10 · 06-23-2011, 02:44 PM

Since the manual tranny x-members are different for a V8 and L6, the shifter rods are the same. The reason for different x-members is in order to put the 3-spd tranny in the same location under the truck. Since the tranny is in the same location, then you can use the same rods. Hope this helps.
Dano

06-23-2011, 02:44 PM	#3
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: 68 C-10 3 on-the-tree shifter rods Since the manual tranny x-members are different for a V8 and L6, the shifter rods are the same. The reason for different x-members is in order to put the 3-spd tranny in the same location under the truck. Since the tranny is in the same location, then you can use the same rods. Hope this helps. Dano __________________ '69 Fleet It ain't yours, if you didn't build it! Last edited by Dano69c10; 06-23-2011 at 02:46 PM.