The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

bagged74 · 07-12-2011, 10:09 AM

the wire in question is in pin F8. the pinout and service manual show it should be gray/blk, but the wire I have is blue and runs down to a 2 pin weatherpak connecton that has a purple wire in it as well. the purple wire the runs to a plastic box with two diodes inside and two other purple wires coming out. i have no idea where these were connected as they were cut when i got the harness.
pin F8 shows to go to the 4wd indicator, but the truck was 2wd and had no 4wd indicator. any ideas?

07-12-2011, 10:09 AM	#770
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	Re: Tbi swap build thread the wire in question is in pin F8. the pinout and service manual show it should be gray/blk, but the wire I have is blue and runs down to a 2 pin weatherpak connecton that has a purple wire in it as well. the purple wire the runs to a plastic box with two diodes inside and two other purple wires coming out. i have no idea where these were connected as they were cut when i got the harness. pin F8 shows to go to the 4wd indicator, but the truck was 2wd and had no 4wd indicator. any ideas?