[Thealien]

Looks good and nice blazer. Looks pretty rust free?

Advance adapters sells a transfer case adapter made of aluminum (or they did when I did mine) 50-5302 Even that one still need a little machining for the speed sensor. Did you also get the 6 bolt to 4 bolt adapter that goes between the transmission and transfer case adapter that is also the location for the speed sensor? 50-0405

I also believe you have to get rid of the bearing supported couple in exchange for the non bearing supported couple 52-9503. I believe this is neccesary to accomodate the reluctor wheel (that you have installed) and the speed sensor that goes into the 6-4 bolt adapter. At one point they had a kit 4l60205 or ? that had all the parts in it. It was a little cheaper than buying them all seperately.

Funny thing is there transfer case adapter has a larger thread size for the shifter and I had to have a bolt and spacer machined.

I have been driving the Jimmy for a little over a year and it is a blast to drive.

Good luck and I will be following your build.