The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**landarts** · 08-04-2011, 11:53 AM

Here is a picture of the product I used to bring the rusty nuts and bolts back to life. I believe I bought evapo-rust at Harbour Frieght for $20.

I would take nuts and bolts from the marked ziploc bag and put them in the solution over night, then take them out rinse them off and them I had a scrap piece of 2x6 with holes drilled in it. Inserted the bolts and sprayed with single stage gloss black.

08-04-2011, 11:53 AM	#5
landarts landarts Join Date: May 2005 Location: Star, Idaho Posts: 1,350	Project: Fixrupr 72 Cheyenne Here is a picture of the product I used to bring the rusty nuts and bolts back to life. I believe I bought evapo-rust at Harbour Frieght for $20. I would take nuts and bolts from the marked ziploc bag and put them in the solution over night, then take them out rinse them off and them I had a scrap piece of 2x6 with holes drilled in it. Inserted the bolts and sprayed with single stage gloss black. Attached Images Last edited by landarts; 08-06-2011 at 12:33 PM.