The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jasons · 09-20-2011, 05:18 PM

I replaced the cab and front clip on my 74 with ones from an 85.

The steering column was hacked and a push button was installed for the starter. I replaced the column with a good one and everything works as it should, but the neutral safety switch is bypassed and I can't find where the wires for it have been spliced together. Where do these wires enter the under dash harness, or where do they go?

The horn also does not work. Where should the horn relay be located?

09-20-2011, 05:18 PM	#1
jasons not enough hours in the day Join Date: Jan 2009 Location: Axtell, NE Posts: 550	85 cab wiring questions. I replaced the cab and front clip on my 74 with ones from an 85. The steering column was hacked and a push button was installed for the starter. I replaced the column with a good one and everything works as it should, but the neutral safety switch is bypassed and I can't find where the wires for it have been spliced together. Where do these wires enter the under dash harness, or where do they go? The horn also does not work. Where should the horn relay be located? __________________ 65 K-10 Short Step 68 C-50 70 K-5 85 K-10 & piles of spare parts