The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**RenoKeene** · 10-20-2011, 04:01 PM

Todays Cheap Trick:
I use drywall screws to fix broken emblem studs. Grind the break flat, drill a small pilot hole, drill a larger hole, grind the point off of the screw, gently thread the screw into the emblem then cut the head off. A dab of JB weld at the base and you are done. The one below was my first attempt and I didn't have any JB....but it worked and like the picture says "Guaranteed to work or your money back".

10-20-2011, 04:01 PM	#43
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,011	Re: Cheap Tricks Todays Cheap Trick: I use drywall screws to fix broken emblem studs. Grind the break flat, drill a small pilot hole, drill a larger hole, grind the point off of the screw, gently thread the screw into the emblem then cut the head off. A dab of JB weld at the base and you are done. The one below was my first attempt and I didn't have any JB....but it worked and like the picture says "Guaranteed to work or your money back". Attached Images __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394 Last edited by RenoKeene; 10-21-2011 at 10:10 AM.