Re: Yet Another s10 swap
I bet a pws pump off a v6 s-10 would work, not sure of if the 4 cylinder ones would work. You can get these saginaw style pumps pretty cheap, especially at junk yards. My bracket ran me 65 bucks or so off ebay, but it is aluminum, I'm sure you can find something cheaper.
But this pump came off a 350 and mounted right into the s-10 steering box. I used pws hoses for the 350 when I got the hose at the parts store, so don't say I need a hose for an s-10 unless that is what pump you go with.
this is an old photo I had, something to show you.
also not sure what all you will be doing with your 350, but if you get a new water pump, make sure it is a long water pump, that should have the accessory holes for the pws pump bracket and also your alternator. Some short pumps don't have all the accessory holes.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481
49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA
Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162
52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame
Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!
www.coffeeandcustoms.com
|