The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Crash_OK · 12-22-2011, 09:58 AM

Yesterday I sand blasted the engine cross member, transmission cross member, transfer case brackets, drive shafts, and the radiator support.

After that I worked some more on the brake lines. Mine were routed outside of the frame; however, I believe it should be routed inside.

After sandblasting the radiator support I found a few cracked places. Today I will weld those up and start painting with the POR15.

Waiting on some pictures of the 5.3L that I am thinking of using.

12-22-2011, 09:58 AM	#40
Crash_OK Registered User Join Date: Nov 2011 Location: Edmond, OK. Posts: 1,362	Re: Crash's 72 K10 Yesterday I sand blasted the engine cross member, transmission cross member, transfer case brackets, drive shafts, and the radiator support. After that I worked some more on the brake lines. Mine were routed outside of the frame; however, I believe it should be routed inside. After sandblasting the radiator support I found a few cracked places. Today I will weld those up and start painting with the POR15. Waiting on some pictures of the 5.3L that I am thinking of using.