The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BigDan3131 · 12-29-2011, 07:26 AM

Ok, instead of having an upper loop with the forward door bars welded in place he does it the opposite way. Was there some reason you chose not to run the forward door bars thru the dash and then down giving you more room? That and the hoop behind the drivers seat is much higher than the front one. With all those tie-in bars it looks sloppy to me especially that diagonal bar. Was that placed just to keep the hoops apart for welding?

Sorry if I ticked you off I'm just really picky about some things.

12-29-2011, 07:26 AM	#82
BigDan3131 Registered User Join Date: Jun 2006 Location: Maple Valley, WA Posts: 1,913	Re: My build thread.. 63 LS powered C10 Ok, instead of having an upper loop with the forward door bars welded in place he does it the opposite way. Was there some reason you chose not to run the forward door bars thru the dash and then down giving you more room? That and the hoop behind the drivers seat is much higher than the front one. With all those tie-in bars it looks sloppy to me especially that diagonal bar. Was that placed just to keep the hoops apart for welding? Sorry if I ticked you off I'm just really picky about some things.