|
Re: 67' C10 Build V8 Conversion & 700r4 trans
Today, I sanded the firewall with scotch brite, & degreased it with a Wax & Grease remover.
I also blew out the Fresh Air Vent, I thought that I cleaned it out pretty well before, I took out about 4 handfuls of leaves and decayed garbage out of each side.
But when I blew 120psi into the fresh air vent it blew out A LOT MORE crap, leave tree seeds, pine needles, what looked like Mudd, probably decayed garbage.
If it is warm enough tomorrow, i will mask & Prime the firewall. I may even paint it.
I received the KBS Frame coating kit in Satin Black today.
So i am ready to finish cleaning the frame all the way back, I am also going to use it on the rear end.
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,
|