The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**29od1** · 03-02-2012, 10:16 AM

I then cut down the remaining part of the stock seat bracket and welded it to the plate that I had made. Here are a few of the installed pics of the hybrid bracket.

For the rear of the seat bracket attachment, I drilled 3 new holes and added some reinforcement brackets under the floor to help spread the load out from the bolts.

03-02-2012, 10:16 AM	#8
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Adapting 2008+ GM SUV Seats to Blazer I then cut down the remaining part of the stock seat bracket and welded it to the plate that I had made. Here are a few of the installed pics of the hybrid bracket. For the rear of the seat bracket attachment, I drilled 3 new holes and added some reinforcement brackets under the floor to help spread the load out from the bolts. Attached Images Last edited by 29od1; 03-02-2012 at 10:27 AM.