The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Born Lucky · 03-07-2012, 10:14 PM

I just recently installed new springs, (2in drop), and I have to say that I really did not need to use a coil spring compressor. Before starting the project I rented the tool from AutoZone, as SAFETY was number one concern.
Right from the start I realized that I did not need the tool. I used a jack to support the lower control arm( this allowed me to remove my upper ball joint nut) and slowly released the control arm. The spring came loose and I handled it with my hands.

03-07-2012, 10:14 PM	#7
Born Lucky Registered User Join Date: Mar 2010 Location: St Charles MO Posts: 481	Re: Coil spring compressor type to buy? I just recently installed new springs, (2in drop), and I have to say that I really did not need to use a coil spring compressor. Before starting the project I rented the tool from AutoZone, as SAFETY was number one concern. Right from the start I realized that I did not need the tool. I used a jack to support the lower control arm( this allowed me to remove my upper ball joint nut) and slowly released the control arm. The spring came loose and I handled it with my hands.